Project Of Beer Can Filling Line With Capacity 2,000BPH

Product Detail

 

1, Parameter

Capacity:    1500can/H(25CPM-Can Per Minute)

Filling product:       Beer

Filling temperature:        0~4?

    Container size :       Aluminum can(11/202 x 413 Aluminum Can)

Voltage: 220V 60HZ 3 phase

 

2, Price list of equipment

NO	Name	Model	Capacity	Qty	Total price(RMB)
1	Inflatable filling sealing machine	BJM4/4/1	1,500BPH (25 CPM - Can Per Minute)	1 set	75000
2	Conveyor			4M
3	Gravity auger track Rinser			1 set	16000
4	Can uploading table and packaging table			1 set	3800
	Total				94,800

Water and electricity for production customer prepared.

Take Notice please:

1)Price: Including tax without shipping cost

2)Place of delivery: In Factory

3)Delivery time: 25working days(Except Chinese Holiday) after deposit and can and cap samples received.

4)Payment term: T/T 30% deposit advanced, 70% balance after inspection in our factory and before shipment.

5)After-sale service: Our engineer will be sent to your factory for installation, commissioning, operation and training. Return air tickets, food, accommodation, and engineer’s $80 wages /each/day are the buyer.

6)Warranty: We provide one year guarantee and life-time technical support, quick-wear spare parts for one-year will be with machines.

7) Packing method: Export Wooden Case with smoked free

 

Specification and Parameter:

 

Working principle of machine:

1, When empty cans go into the first set automatically by conveyor, gas tubes (carbon dioxide) automatic down to the bottom of the cans and inject carbon CO2(carbon dioxide), which exchange the air inside the can due to the density different of carbon dioxide and air.

 

2, The can Injected co2 goes into the second set automatically by conveyor,, beer tube automatic down to the bottom of the cans and filling beer.

 

3, Filled cans go into the sealing machine automatically by conveyor, before sealing, inject CO2

again then start sealing, which ensure there’s no air inside of the can.

 

Technical parameter

Model	BJM4/4/1
Capacity	1500BPH
Inflatable head	4
Filling head	4
Sealing head	1
Suitable can diameter(mm)	Suitable can diameter: f50-f90mm Suitable can height: 100-160mm

Suitable can diameter(mm)	Suitable can diameter: f50-f90mm Suitable can height: 100-160mm
Motor power(KW)	1.65
Outside dimension	2200*1000*2000
Machine total weight(Kg)	500

Configuration

Main electrical components
No	Name	Producer
1	PLC	Japan Mitsubishi
2	Inverter	Japan Mitsubishi
3	Touch screen	Taiwan WEINVIEW
4	button ,light	Schneider France
5	Low pressure circuit breaker	Schneider France
6	Control relay	Schneider France
7	AC contactor	Schneider France




Detail information:

 

CUSTOMER: IPS

PRODUCT SIZE: 355ml 211Diameter/202Neck x 413Height Aluminum Can

PRODUCTION RATE: 1,500cph or (25cpm - Can Per Minute)

FILL PRODUCT: Beer

 

 

CAN UPLOADING TABLE

· Used for can storage before rinsing

 

GRAVITY TRACK RINSER

· Declining Twist Rinser Arrangement

o Twist Rinse Decline Angle 30 

o Rinser Spray Nozzles Piping have Single Point Connection

o Track and Rinser are supported 

· Trackwork Rinser Infeed and Trackwork Rinser Discharge

· Fully Enclosed Spray Area to contain Spray Mist and Water Runoff

· Under Track Drip Pan with Drain

Suitable can diameter(mm)	Suitable can diameter: f50-f90mm Suitable can height: 100-160mm
Motor power(KW)	1.65
Outside dimension	2200*1000*2000
Machine total weight(Kg)	500

Configuration

Main electrical components
No	Name	Producer
1	PLC	Japan Mitsubishi
2	Inverter	Japan Mitsubishi
3	Touch screen	Taiwan WEINVIEW
4	button ,light	Schneider France
5	Low pressure circuit breaker	Schneider France
6	Control relay	Schneider France
7	AC contactor	Schneider France




Detail information:

 

CUSTOMER: IPS

PRODUCT SIZE: 355ml 211Diameter/202Neck x 413Height Aluminum Can

PRODUCTION RATE: 1,500cph or (25cpm - Can Per Minute)

FILL PRODUCT: Beer

 

 

CAN UPLOADING TABLE

· Used for can storage before rinsing

 

GRAVITY TRACK RINSER

· Declining Twist Rinser Arrangement

o Twist Rinse Decline Angle 30 

o Rinser Spray Nozzles Piping have Single Point Connection

o Track and Rinser are supported 

· Trackwork Rinser Infeed and Trackwork Rinser Discharge

· Fully Enclosed Spray Area to contain Spray Mist and Water Runoff

· Under Track Drip Pan with Drain

· Rinser manufactured with 304 stainless steel

· This unit has a solenoid to shut down water when machine is not operating

· Capable of 1500 (cph) Cans Per Hour or 25 (cpm) Cans Per Minute



 

   Fully Enclosed Spray Area

Capacity	1500 cans per hour
Suitable can diameter	f50-f90mm
Suitable can height	100-160mm
Weight	200kg
Length	1500mm

 

 

INFEED CONVEYOR

· Approximately 5 feet (1524mm) Single Lane Filler/Seamer Infeed Conveying Trackwork from the Rinser will Sweep onto the Filler/Seamer Infeed Conveyor

· Conveyor have Support Legs

· Conveyor Side Body manufactured with 304 stainless steel

· Should be single drive motor for entire conveyor mounted on discharge conveyor

 

 

FOUR HEAD CO2 INJECTION & FOUR HEAD LIQUIID FILLER UNIT

· Filler/Seamer Unit approximately 86” long x 39” wide & 78” high

o 2200mm Long x 1000mm Wide x 2000mm High

· Capable of 1500 (CPH) Cans Per Hour or 25 (CPM) Cans Per Minute

· 4 Head CO2 Inflatable Head for CO2 (carbon dioxide) Introduction for Oxygen evacuation              

· 4 Head Liquid Filling Station 

· Adjustable guide rails for can stability.

· Filler/Seamer have full 360 degree Plexiglas Shielding with doors. 

· Full Controls Package

o One Controls Cabinet for Filler, Seamer, Conveyor and other Ancillary Devices

· Filler manufactured with 304 stainless steel

· There be a drain pan under the main machine

  

  




SINGLE STATION DOUBLE SEAMING OPERATION

· Single Station Double Seaming Operation

· Before Lid Dropper applies Ends CO2 dose is Injected 

· Before Seaming Operation Automatic Lid Dropper


· Off Line Can Seamer Station

o Cans are positioned to engage the Seaming Chucks  

o The Seamer Tooling Head while Spinning Lowers Down to the Can to engages the Seamer Tooling 

· 2 Stage Seaming Operation (Seaming Chucks Included)

o Stage 1 folds the End Curl around the Can Flange

o Stage 2 irons the double seam into it final shape creating the airtight seal.

· Automatic Lid Dropper

· Seamer manufactured with steel plate and 304 stainless steel (see below picture).




DISCHARGE CONVEYOR

· Approximately 5 feet (1524mm) Single Lane Filler/Seamer Discharge Conveyor

· Conveyor Section have Support Legs

· One Single Motor drive the belt from the Infeed Conveyor through the Filler/Seamer to the end of the Discharge Conveyor

o PLC: Mitsubishi

o Motor Power: 0.55kw

· Conveyor Side Body manufactured with 304 stainless steel

 

DISCHARGE PACKING TABLE

· Discharge conveyor is capable of pushing onto Packing Table

· 90 degrees to the discharge conveyor and cable of holding 70 cans minimum

· There are rails to avoid Filled Cans from falling off

 

 

ADDITIONAL INFORMATION REQUESTS  

· Power:   

o 60 Hertz for USA Power Requirements

o 220VAC 3 phase preferred

· Compressed Air Requirements 0.5m3/min  

· Single Cabinet Controls Package for Filler & Seamer  

· Conveyor Belt Drive Motor

· Warranty

· 1 year Warranty

· Warranty includes: The components are warranted against manufacturing defective parts for a period of fourteen months from the date of delivery basing on eight hours/shift of five day working week. This warranty does not cover consumption parts and parts failure due to improper use of equipments, abuse normal wear parts and etc

 

 

 

Device Packaging information:

Wood case size: 2300mm X 1100mm X 2100mm

Gross Weight: 800kg